DAEWOO PUMA 400LMB
USED
S/N 35LM1880
VINTAGE 2005
SPECIFICATIONS BELOW WERE WHEN NEW AND ARE FOR YOUR REFERENCE AND NO GUARANTEES THAT THIS USED MACHINE WILL SPEC OUT EXACTLY THE SAME.
The Daewoo Puma 400LMB turning center was designed for heavy and interrupted cutting, long-term high accuracy, and superior surface finishes. High speed turret indexing and fast rapid traverse rates minimize non-cutting time. Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value.
FOB: Hales Machine Tool – Plymouth, MN
Rigging NOT included
Terms: Payment in full prior to pick up
Installation to be negotiated
No Warranty / As is Where is
Includes: 15” chuck, miscellaneous turret tooling, (1) X axis live tool, (1) Z axis live tool
Turbo Chip Conveyor
$69,000.00
Click here for more details & features >>
SPECIFICATIONS
CAPACITY:
Swing over bed 30.3"
Swing over carriage 23.2"
Distance between centers - 400LMB 86"
Maximum turning diameter 22.0"
Maximum turning length - 400LMB 79.8"
SPINDLE:
Spindle speed 20-2,000 RPM
Spindle nose ASA-A2-11
Draw tube I.D. 4.62"
Spindle bore diameter 5.20"
AC Spindle Motor (30 min.) 50 HP
Spindle speed ranges 2
Maximum spindle torque 2,039 ft-lbs.
SPINDLE INDEXING:
Minimum programming angle (degrees) .001
Rapid traverse rate (RPM) 100
BED, SADDLE, & CROSS SLIDE:
X axis travel 14.3”
Z axis travel – 400LMB 84.8"
Angle of slant bed 45 degrees
X axis guideway span 14.2"
Z axis guideway span 16.5"
Tailstock guideway span 11.8”
X axis rapid traverse rate 550 IPM
Z axis rapid traverse rate –400LMB 710 IPM
X / Z axis ball screw diameters 1.6" / 2.0"
Maximum X axis feed thrust 4,970 lbs.
Maximum Z axis feed thrust -400LM 5,730 lbs.
TURRET:
Number of tools 12
Number of live tool positions 12
Turning tool shank size 1.25"
Boring bar diameter 2.5"
Turret index time (next station) 0.25 sec.
Turret index time (180º opposing stations) 2.1 secs.
Tool selection Bi-directional
ROTATING TOOLS:
Rotating tool RPM 3,000
Rotating tool HP 10
Rotating tool torque 70.5 ft-lbs.
Rotating tool type BMT 75
Rotating tool collet type ER40
Maximum collet ID 1.0"
TAILSTOCK:
Tailstock quill diameter 4.7"
Tailstock quill stroke (programmable) 4.7"
Maximum tailstock quill thrust / maximum hydraulic pressure 3,210 lbs. / 580 PSI
Tailstock body stroke (programmable) - 400MB / 400LMB 39.4” / 80.7"
Tailstock spindle taper (built-in type) MT #5
COOLANT SYSTEM:
Coolant pump pressure 65 PSI
Coolant pump motor 1.2 HP
Coolant tank capacity – 400MB / 400LMB 48 gal. / 69 gal.
HYDRAULIC / LUBRICATION:
Hydraulic tank capacity 2.6 gal.
Hydraulic oil required Mobil DTE 24 or Shell Tellus 32 *
Way lubrication tank capacity 0.5 gal.
Way Lubrication oil required Mobil Vactra #2 or Shell Tonna T68*
* Cross reference these numbers for other brands
GENERAL:
Floor space with chip conveyor (Length X Width) -400LMB 260” x 99” No CC
Net weight -400LMB 23,670 lbs.
Voltage required 205 - 235 volt / 3 phase
Power requirement - 400MB / 400LMB 58 KVA (152 amps @ 220 volts)